Calculations, Sizing, Applications, Operation, Diagnostic

Testing, Troubleshooting and Maintenance

Hotel Ibis Yogyakarta l 1 – 3 Oktober 2014 l 08.00-16.00 WIB

Rp.6.000.000,- per peserta (Non-Residential)

Rp.5.000.000,- per peserta (Pendaftaran 4 peserta dari 1 perusahaan)

DESCRIPTION

Extensive course materials provided contained useful information about valves/sizing and selection both theoretical and practical. You will gain a practical understanding of control valves, actuators, and positioner designs and their applications. The course also provides methods that can be used to identify specific valve problems and arrive at acceptable solutions within engineering tolerance.(evp)

OUTLINE

1. Compare various types of final control elements
2. Understand a typical valve operation in a control loop
3. Differentiate between various types of valves and the benefits of each
4. Compare rising stem to rotary style valves
5. Analyze a control system to determine control valve needs
6. Use ISA standards for control valve specification and selection
7. Size valves for any flow condition likely to be found in a process plant
8. Evaluate and select actuators for specific applications
9. Specify appropriate auxiliaries including positioners and I/P transducers
10. Design control valve installations that are safe and trouble-free

COURSE CONTENT

1. Introduction:
   • Valve in Loop,
   • Actuator,
   • Positioner
2. Basic Valve Types:
   • Globe Valves,
   • Ball Valves,
   • Plug Valves,
   • Butterfly Valves
3. Actuators:
   • Spring/Diaphragm,
   • Piston,
   • Vane,
   • Scotch-Yoke,
   • R & P
4. Comparison:
   • Rising Stem,
   • Rotary Stem,
   • Accessories,
   • Positioner,
   • I/P Converters
5. Valve Performance:
   • Gain,
   • Time,
   • Trim,
   • Special Needs
6. Flashing/Cavitation & Noise:
   • Cause/Effect,
   • Prevention,
   • OSHA,
   • Source and Abatement
7. Installation:
   • Performance, Safety and Others
8. Valve Sizing:
   • Valve sizing calculation Manual,
   • Valve Sizing calculation Computer
9. Specification and Selection:
   • Process Requirements,
   • Other Considerations
10. Maintenance and Troubleshooting Considerations:
    • Special Requirements,
    • Diagnostic Tools
11. Smart Valves:
    • Available Designs,
    • Applications in Industry
12. Test valves to evaluate performance factors
13. Size valves manually and with software
14. Specify valves, actuators, and auxiliaries for specific applications
15. Evaluate operation of valves with pneumatic actuators and positioners
16. Smart valve/positioner operation demonstration

INSTRUCTOR

Dr. Eng. Deendarlianto, & Team

METHOD

• Presentation
• Discussion
• Case Study
• Evaluation

PARTICIPANT
This Intensive program covering the educational needs of Instrumentation and Control Engineers & Technicians, Mechanical Engineers & Technicians, Projects Engineers, Operation Engineers, Process and Utility Supervisors, and Technical Supervisory personnel involved in Sizing, Selecting, and Applying Process Control Valves. No specific prerequisite training or experience required for registration.

FACILITY

• Certificate, Training Kit, Module / Handout, Softcopy (USB flashdisk) Lunch, Coffee Break, Souvenir
• Transportasi antar jemput selama training ( bandara / stasiun/ terminal, Hotel-tempat pelatihan PP)

REGISTRATION
Biaya Investasi: Rp.6.000.000,- per peserta (Non Residential)

Rp.5.000.000,- per peserta (Pendaftaran 4 peserta dari 1 perusahaan)

The post CONTROL VALVES AND ACTUATORS appeared first on Warta Pelatihan.

Pelatihan ini akan dilaksanakan di:

Hotel Aston Tropicana* Jl. Cihampelas Bandung ( *****)

Hotel Papandayan* Jl. Gatot Subroto No.83 Bandung(*****)

( 3 Days )

Pukul 08.00 – 16.00 WIB

Deskripsi

Pada awalnya perkembangan sistem turbin gas berjalan lambat karena terbatasnya teknologi pada saat itu, hingga pada tahun 1935 sistem turbin gas mengalami perkembangan yang pesat di mana diperoleh efisiensi sebesar lebih kurang 15%. Pesawat pancar gas yang pertama diselesaikan oleh “British Thomson Houston Co” pada tahun 1937 sesuai dengan konsepsi Frank Whittle (tahun 1930).

Seiring dengan semakin pesatnya kemajuan teknologi dan iklim usaha yang membaik, maka sistem turbin gas telah banyak diterapkan untuk berbagai keperluan seperti mesin penggerak generator listrik, mesin industri, pesawat terbang dan lainnya. Sistem turbin gas dapat dipasang dengan cepat dan biaya investasi yang relatif rendah jika dibandingkan dengan instalasi turbin uap dan motor diesel untuk pusat tenaga listrik.(dg)

Materi Pelatihan

1. Gas Turbine Review

2. Fundamental Thermodynamic Of Gas Turbine

3. Klasifikasi Gas Turbin

• Turbin Gas Poros Tunggal
• Turbin Gas Poros Ganda

4. Gas Turbine Material Desain dan Spesifikasi

5. Gas Turbine Components

• Komponen Utama
• Kompenen Penunjang

6. Prinsip Kerja Turbin Gas

7. Material and Construction

8. Bearing and Seal

9. Lubrication System

10. Fuel And Fuel Supply System

11. Combustion Air Filter

12. Exhaust System

13. Auxiliary Component and System

14. Control and Instrumentation

15. Prosedur Pengoperasian Turbin Gas

• Rachet,
• Rubbing Check
• Cranking
• Fuel Gas Leak Check
• Flame Detector Check
• Over Trip Test
• Peak Load

16. Perak yang diinginkan

1. Gas Turbine Maintenance

• Predictive maintenance
• Preventive maintenance
• Repair Maintenance
• Corrective maintenance
• Breakdown Maintenance
• Modification maintenance

2. Shutdown Inspection System

• – Combustion Inspection
• – Hot Gas Path Inspection
• – Major Inspection

3. Discussion and cases study

Participans

1. Electrical & Mechanical Engineer / Supervisor
2. Instrument Engineer / Supervisor
3. Professionals
4. Plant Maintenance / Operators / Supervisor / Superintendent

Instruktur

Teguh Puji Purwanto, Ir, MT

Course Methods

Multimedia, Group Discussion, Role Play, Case Study

Facilities

• Training Kit ( ATK, Handout)
• Sertifikat Dago Consultant
• Meeting room Hotel ****
• 2x Coffee Break and Lunch per hari
• Souvenir
• Special Dinner
• City Tour

Course Tution

Biaya pelatihan sebesar Rp 8.500.000/peserta Non residensial. Khusus untuk pengiriman 3 peserta dari perusahaan yang sama, biaya pendaftaran sebesar Rp. 8.000.000 Registration should be made 5 days prior to the implementation of training. Number of attendees must be in accordance with the number of participants registered.

The post GAS TURBINE TECHNOLOGY: DESIGN, OPERATION, CONTROL, INSPECTION, TROUBLESHOOTING AND MAINTENANCE appeared first on Warta Pelatihan.