PELATIHAN BELT CONVEYORS AND HUTES Plus CONVEYOR, CHUTE AND FEEDER DESIGN

By | December 19, 2012

PELATIHAN

BELT CONVEYORS AND HUTES Plus CONVEYOR, CHUTE AND FEEDER DESIGN

Description

The workshop is broken into three days – the first two days will cover basic conveyors, selection, safety, legal obligations, terminology and background and an optional third day will deal with the nuts and bolts of conveyor, chute and feeder design. Belt conveyors frequently provide the most satisfactory and economical method of transporting materials such as mine ores, earth, sand, crushed stone, cement and concrete. The high and continuous speed of operation of the belt makes for a high capacity of transport of materials. This workshop is designed for engineers and technicians from a wide range of abilities and backgrounds and will provide an excellent introduction to troubleshooting, maintenance and basic design rules of conveyors and chutes. It is intended to cover the fundamentals of belt conveying and would be useful for those with little experience in this area. Before commencing a detailed course on conveyors it is important to have a solid practical knowledge of the material to be conveyed. A basic knowledge is provided of the bulk materials characteristics and properties. This will enable you to have a far stronger ability to troubleshoot and design workable conveyor systems. Numerous tips throughout the course make it practical and topical. You will also engage in problem solving and case studies to absorb the materials as quickly and effectively as possible.( dnh)

Tujuan

1. INTRODUCTION

  • Fundamentals of bulk materials handling
  • Nature of bulk solids
  • Characteristics of generally used bulk materials
  • Conveyors and chutes overview

2. BELT CONVEYING

  • Introduction
  • Layout
  • Basic Configuration
  • Components of a standard conveyor
  • Capacity of belt conveyors and selection of belt width
  • Materials and components Selection
  • Pulley & Other rotating Parts
  • Simple calculation of belt tension
  • Selection of drive
  • Troubleshooting tips
  • Take-ups
  • Belts Operations
  • Tips for cost savings
  • Practical Exercise

3. SAFETY OF CONVEYORS

  • Conveyor safety standard
  • General background on AS 4024.1 (RA and hazard recognition)
  • Hazard recognition
  • History of accidents
  • Key conveyor safety issues
  • Demonstration of unsafe conveyors
  • AS 1755 conveyors
  • Chute doors hazards and controls
  • Case Study
  • Practical Exercise

4. TROUBLESHOOTING OF CONVEYORS

  • Troubleshooting conveyor problems
  • Types of joints
  • Splice failures
  • Splice inspections
  • Splice repairs
  • Typical problems
  • Root cause process
  • Systematic approach for tracking
  • Site specific problems
  • Case Study
  • Practical Exercise

5. STORAGE AND FLOW

  • Flow properties of materials
  •  Funnel – flow and expanded flow
  • Flow rate analysis
  • Gravity reclaim
  • Bin wall pressures
  • Practical Exercise

6. BELT TENSION CALCULATION

  • Carrying Surface
  • Drive Data
  • Environment
  • Height
  • Length
  • Loading Rate
  • Material
  • Pulley Diameter
  • Speed
  • Take-up. Type
  • Width of Belt (Inches)

7. SELECT THE PROPER REINFORCEMENT (USUALLY FABRIC) COMBINATIONS

  • Flexibility to negotiate the pulleys
  • Troughability
  • Impact Resistance
  • Load Support

8. CHUTE DESIGN

  • Liner selection
  • Use of solidworks
  • DEM and application to transfer design
  • Stress analysis using cosmos
  • Chute Design Exercise

9. FEEDER DESIGN

  • Calculation of loads/drive torques and power
  • Feeder selection
  • Feeder Design Exercise

10. APPLICATIONS AND FUTURE TRENDS

  • Case studies
  • Future trends in conveyors, feeders and chutes

Participans

  • Technicians and Maintenance Engineers
  • Plant Engineers
  • Operation, Maintenance, Inspection and Repair Managers,
  • Supervisors and Engineers
  • Mechanical Engineers and Technicians
  • Design Engineers
  • Electrical Engineers and Technicians
  • Consulting Engineers

Instruktur

Teguh Pudji Purwanto,Ir,MT

Facilities

  • Module / Handout
  • Softcopy Materi
  • Sertifikat
  • Bag or bagpackers
  • Training Kit
  • 2xCoffe Break & 1 Lunch
  • Souvenir
  • Airport pickup service
  • Training room full AC and Multimedia

Time and Venue

Reguler Training

Tanggal                   : 15-17 Januari 2013

                               05-07 februari 2013

                               19-21 Maret 2013

                               09-11 April 2013

                               14-16 Mei 2013

                               11-13 Juni 2013

                               16-18 Juli 2013

Pukul                      : 08.00 – 16.00 WIB

Tempat                   : Hotel IBIS Yogyakarta

Course Fee

Rp. 7.000.000 untuk pengiriman peserta 1 orang

Rp. 6.200.000 untuk pengiriman peserta 3 orang dari company yang sama

Rp. 6.000.000 untuk pengiriman peserta 4 atau lebih dari company yang sama

  1. FORMULIR PENDAFTARAN TRAINING
  2. Wajib diisi
  3. Jenis Pendaftaran Training
  4. PERSONAL DATA
  5. Wajib diisi
  6. Wajib diisi
  7. Wajib diisi
  8. Wajib diisi
  9. Sertakan Email yang Valid
  10. Wajib diisi
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. Wajib diisi
  13. Pembayaran
  14. Pesan untuk Penyelenggara Training
 

cforms contact form by delicious:days

 

Leave a Reply

Your email address will not be published. Required fields are marked *